Check the settings first
Make sure the unit is on cool mode, not fan or dry, and that the set temperature is lower than the room temperature. Replace the remote batteries, shut the windows and doors, and give the unit a few minutes.
Clean the filters
A clogged filter restricts airflow and weakens the cooling, and it can make the indoor coil freeze. Most indoor filters slide out and can be washed in lukewarm water and dried before they go back. Check your manual first.
Look at the outdoor unit
The outdoor unit needs room to breathe. Check that plants, debris or stacked boxes are not blocking it, that the fan is turning, and that the isolator next to it has not tripped.
Look for ice or water
Ice on the indoor unit or the thin pipe usually means too little airflow or too little gas. Water dripping from the indoor unit usually points to a blocked drain. Switch the unit off and let any ice melt before you run it again.
Do not keep restarting it
Manufacturers commonly advise waiting a few minutes, often about three, between switching an aircon off and on again, so the compressor is not started against built-up pressure. Check your manual for the exact wait.
When it needs a technician
Call a technician if the unit trips the breaker, the ice keeps coming back, water leaks into the room, you smell burning, or it still does not cool after the checks above. A system that has lost gas has a leak, because the gas is not used up, so the repair should find the leak and not only top the gas up.
